The Ugandan Jobline

• When stand by, keep in
  contact with the Operation Supervisor / Coordinator and stay in contact by
  means of telephone.
• Upon arrival at the
  location of work and in collaboration with the assigned Crew Leader/Job
  Supervisor, report to the Customer Representative and to establish detail
  of the job to be performed.
• At first opportunity and
  in collaboration with the Crew Leader/Job Supervisor, check all company
  service and sales items to be in satisfactory condition to fulfill the
  specific job requirements.
• To attend on location
  pre-job HSE meeting if so required and wear Personnel Protective Equipment
  issued by Company during the job and when required by the customer.
• To follow shift
  arrangements and meal breaks as instructed by the Crew Leader/Job
  Supervisor and to carry out the assigned duties as a social member of the
  team.
• Report any operational
  problems which may occur before, during and after the job to the assigned
  Crew Leader/Job Supervisor as soon as possible.
• Make recommendations for
  the safe execution of the job and report any non safe acts or near miss
  accidents/incidents.
• Attend all monthly/Weekly
  QHSE meetings
• On completion of the job;
  rig down the equipment, clean and prepare for back loading.
• Report any shortcomings
  or status of non-conformance of equipment on the Company equipment fault
  report.
• If assigned as Stabber in
  collaboration with the Crew Leader, inspect the stabbing board, safety
  line(s) and safety points.
• Before commencing the
  job, discuss with the driller on signals and procedure to be used and
  repeat this each time the drilling crew changes.
• To attend HSE training,
  equipment training and medical checks as required and arranged by Company.
  
• Accept any reasonable
  base duties as required.
• Responsible for QHSSE and
  EEP operations for his relevant functions.
• Accountable to safe
  operation of Company and Customer (if any) Equipment in his area of
  operations 

• All candidates should
  possess a diploma or degree in a technical line, or past experience in a
  similar operation i.e. rig operation or casing and tubing running
  activity. 
• All persons must be able
  to communicate in English, both verbally and in writing, to be able to
  read instructions and fill out job related paperwork and write reports. To
  be proven through a small test with reports, delivery tickets and a short,
  hand written report. 
• The applicant should be sound
  mentally and physically.
• The applicant should be
  able to perform his/her duties in a variety of irregular working hours.
• A physical examination
  prior to employment is required to verify fitness.
• Comprehensive knowledge
  on Safety 
• Be physically good and
  can work in hard weather conditions 
  
• Work is performed in an
  onshore or offshore environment.
• Communication skills,
  reading and writing (preferable English)
• Applicants must have a
  minimum of two years experience within their field of expertise. i.e. rig
  operation or casing and tubing running activity and familiar of all TRS
  equipment.
• The Technician also
  should be aware of all safety standards and the work instructions
  including manuals from all Weatherford equipments being used. 

Related Jobs